Despite of the fact that, the number of manual transmission vehicles sold is as low as 6%, as most cars working as taxis and big vehicles are manual. Most driver prefer stick shift vehicle than automatic vehicles for some amazing and unique features. Below are the 8 easy steps to help you learn drive manual transmission from scratch.

Know your way around
In a manual transmission, the driver needs to change the gears. Most manual cars come with 4 or 5 speeds, other than the reverse gear.

This will requires you to use a clutch pedal at the far left, when changing gears. As you press the pedal down, the clutch engagement is over.

As opposed to being a gear, neutral is, to be correct, the absence of gear. At the point when the engine is in neutral, the vehicle won’t move even after revving.

The 2nd gear is the best to use when driving on a step road or in a busy downtown.

Learn the Gears
The first thing to think of when learning a manual car is to master how to shift gears when the vehicle is moving. Each time you change the stick, press the clutch pedal too. Always adjust the stick completely, without pressuring it too much. No do a similar thing when another person is driving the vehicle. If you fail to change gears well, the vehicle will stop part of the way through.

Starting the Engine
Before you start the engine of the vehicle, put the car in neutral, with the aim that it doesn’t jump all of a sudden. Some vehicle will not start without pushing the clutch pedal. Give the engine a chance to warm up while the shifter is at neutral.

Using the Clutch
The clutch system make the gears transit forward and backward. In the event that you release the clutch pedal without pulling the gear totally, there will be an upsetting noise.

Always keep in mind that the clutch pedal is found on the far left, while the gas pedal is on the right, and the brake is in the center. Learners frequently think that it’s difficult to recall the arrangement while going through a manual vehicle driving lessons.

Up-shifting
Shifting the gears up is all about bringing the clutch pedal upward, while pushing the gas pedal down. It’s the step when you change the gears and the vehicle gets pace
 
Downshifting
What happens when you attempt to slow down when driving a manual vehicle? You downshift. This is one of the most recognizable differences amongst manual and automatic transmissions. It doesn’t only slow down the vehicle, yet it additionally puts the car in right gear.

Reverse
This is the most sensitive gear, so be careful when utilizing it. To go to reverse, you have to lift collar on the shift lever. Never at any point do this while the vehicle is moving.

Parking
These are sometimes called the emergency brake plays the most imperative role when parting the vehicle. The reason is on other than, unlike automatic transmission vehicles, the absence of a parking gear. The pull up of the emergency brake works adequately in most of the cases.